How to control the 3D hot bending glass heat pipes of life

How to control the 3D hot bending glass heat pipes of life

With the continuous development of household electrical appliance industry and the improvement of product technology, 3D hot bending glass heat pipes because of its simple and convenient to use and install, pollution-free advantages is widely used in all kinds of heating occasions, especially on the electric heating boiler is relatively common, its service life is longer than the commonly, but if the users do not pay attention to the correct use and maintenance, and can greatly shorten the service life of heating tube, so then to share how to control the 3D the service life of hot bending glass heat pipes.

3D hot bending glass heat pipes of technical requirements

3D hot bending glass heating tube surface temperature is higher, so if the cylinder is heat conduction oil flow rate is too low, can lead to local heating tube surface temperature is too high, forming a carbon deposition. So choose a good heat conduction oil for 3D hot bending glass heat pipes is very important. In addition, the flow rate of the pump to choose as far as possible big, so can reduce the surface of the oil temperature is too high. When the equipment stops working, the temperature drop to normal temperature state, avoid high temperature lead to stop.

How to control the 3D hot bending glass heat pipes of life?

For the control of electric heating tube life, can be done by two aspects: one is the master in production; Second, completes the maintenance in use.

A, how to grasp well in the production of electric heat pipe of life?

1, using high quality materials, and to understand the environment at two o 'clock be short of one cannot. Such as water heating tube, iron is easy to rust, can have the oxidation to produce copper, so the use of hot bending glass heat pipe is better

2, processing technology. If the choice of material decides the service life of heating tube of 65%, then the processing accounts for 35% of the rest.

Second, how to to do a good job of maintaining heating tube in use?

1, has the good use frequency;

2, get into the habit of regular cleaning, scale and other attached objects;

3 and kettles of electric heat pipe can't dry.

Although 3D hot bending glass heating tube service life is long, but also need to reasonable use and maintenance, to extend the service life of heating tube.