news

Mould heating pipe structure and its application is

Mould heating pipe structure and its application is
Release time：2023-08-23 00:00:00

Mould heating tube in the application of the life

Mould heating tube in the application of the life
Release time：2023-09-15 00:00:00

Mould heating tube in daily management, need to pay more attention to details

Mould heating tube in daily management, need to pay more attention to details
Release time：2018-07-24 00:00:00

Mould heating pipe material selection of common sense, do you know about it

Mould heating pipe material selection of common sense, do you know about it
Release time：2018-08-21 00:00:00

Troubleshooting of abnormal temperature rise of 3D hot bending glass heating tube

In 3D hot bending glass production, abnormal heating of the heating tube (more than 10% above the set value) may lead to glass deformation, explosion or equipment damage. Perform the following operations: Power off safety Check → System Parameter diagnosis → Hardware fault location.
Release time：2025-04-15 09:36:03

Technological upgrades drive innovation in the mold heating tube industry.

In recent years,with the manufacturing industry's increasing demands for production efficiency and environmental protection,mold heating tubes,as a key component of industrial thermal management,have seen their technological iterations and market applications draw significant attention.Industry analysts point out that intelligent control and the development of green materials have become important directions for the upgrade of this field.
Release time：2025-03-18 11:58:03

What is the performance degradation rate of 3D hot bending glass heating tubes after long-term cyclic heating?

1、 The core mechanism of performance degradation
Release time：2025-03-03 17:48:00

What special fixing and protective measures are required for using mold heating tubes in high-frequency vibration environments?

If the mold heating tube is used in a high-frequency vibration environment, improper fixing and protective measures can easily cause damage to the heating tube, affecting the normal operation of the mold.
Release time：2025-02-26 17:48:24

How to achieve an optimized balance between energy consumption and production efficiency of heating tubes in the large-scale production of 3D hot bend

In the large-scale production of 3D hot bending glass, the heating tube serves as a key heating element, and the balance between energy consumption and production efficiency directly affects the economic benefits and market competitiveness of the enterprise.
Release time：2025-02-24 16:37:41

Will the heating performance of 3D hot bent glass heating tubes deteriorate after prolonged use?

After prolonged use, the heating performance of 3D hot bent glass heating tubes is likely to deteriorate due to various factors.
Release time：2025-02-12 17:32:38

How to choose the appropriate heating tube power for different mold materials?

In industrial production, the correct selection of mold heating tube power is crucial to ensure the normal operation of the mold, product quality, and production efficiency.
Release time：2025-02-07 10:26:14

How to ensure that the installation process will not cause damage to the mold heating tube?

The following are methods to ensure that the mold heating tube is not damaged during installation:
Release time：2025-01-16 17:03:51

How to choose the power of the mold heating tube reasonably based on the size of the mold, the required heating rate, etc?

When selecting the power of the mold heating tube, the size of the mold and the required heating rate are two key factors.
Release time：2025-01-11 16:31:43

What is the heat dissipation performance of 3D hot bent glass heating tube?

As a new type of heating element, the heat dissipation performance of 3D hot bent glass heating tube is an important characteristic worthy of further exploration.
Release time：2024-12-19 11:01:56

What are the common materials for the shell of mold heating tubes? What are their respective advantages and disadvantages?

The common materials for the shell of mold heating tubes are stainless steel, Engley 800 alloy, and ceramics. 1、 Stainless steel
Release time：2024-12-16 11:44:51

Total: 78 12 3 4 5 Next Last